Linear Units

 

System size 70

 

Common features

  • sturdy aluminium frame, 70 x 70 mm
  • profile guide rail for high-precision guidance
  • can be fitted with one or two carriages
  • aluminium profile with slots for fastening
  • fully covered
  • low maintenance
  • ready for connection of inductive reference and end switches
  • optionally available: adapter plates, slot nuts, shaft drive, motor flange combinations and switches

 

LLE70

 

Technical data

Compact module without drive

max. perm. centr. force per carriage 500 N
max. perm. axial force 500 N
 
perm. bending torque with full support 1 carriage double carriage
Mx 20 Nm 40 Nm
My 30 Nm 120 Nm
Mz 20 Nm 68 Nm
 
weights without motor
stroke 0 mm 2,00 kg 2,40 kg
per 100 mm stroke 0,40 kg 0,40 kg

 

Technical information

 

LSLE70

 

Technical data

Compact module with timing belt drive

transmission 1:1
max. perm. centr. force per carriage 500 N
max. perm. axial force 500 N
stat. friction torque (with 1 carriage) 6,6 Ncm
max. drive torque 4 Nm
max. motor shaft Ø 14 mm
repetition precision ± 0,03 mm
positioning precision ± 0,15 mm
Vmax (depending on motor) 1,5 m/s
 
perm. bending torque 1 carriage double carrige
Mx 20 Nm 40 Nm
My 30 Nm 120 Nm
Mz 20 Nm 68 Nm
 
weights without motor
stroke 0 mm 2,90 kg 3,40 kg
per 100 mm stroke 0,60 kg 0,60 kg

 

Technical information

 

LHLE70

 

Technical data

Compact module with ball screw drive 12 x 10

max. perm. centr. force per carriage 500 N
max. perm. axial force 500 N
stat. frictional torque (with 1 carriage) 3 Ncm
max. drive torque 4 Nm
max. motor shaft Ø 14 mm
repetition precision ± 0,025 mm
positioning precision ± 0,05 mm
 
perm. bending torque 1 carriage double carriage
Mx 20 Nm 40 Nm
My 30 Nm 120 Nm
Mz 20 Nm 68 Nm
 
weights without motor
stroke 0 mm 2,40 kg 2,90 kg
per 100 mm stroke 0,60 kg 0,60 kg

 

Technical information

 

*Standard spindle accuracy according to IT7 (52 μm / 300 mm measuring length)

 

System size 80

 

Features

  • profile guide rail for high-precision guidance
  • high movement speeds and precise positioning
  • sturdy aluminium frame (80 x 80 mm) with grooves for fixing
  • externally accessible lubrication system
  • both inductive and mechanical end and reference switches possible
  • incl. aluminium table plate
  • motor flange on either left or right
  • can be fitted with one or two carriages
  • two axes can be driven synchronously via a single drive shaft
  • optionally available: adapter plates, slot nuts, shaft drive, motor flange combinations and switches

 

MSLE80

 

Technical data

Compact module with special timing belt

transmission 1:1
max. perm. centr. force per carriage 1600 N
max. perm. axial force 1300 N
number of teeth 24
feed constant 192 mm -1
Vmax (depending on motor) 3,5 m/s
max. drive torque 75 Nm
repetition precision ± 0,05/1000 mm
 
perm. bending torque 1 carriage double carriage
Mx 72 Nm 144 Nm
My 42 Nm 210 Nm
Mz 36 Nm 144 Nm
 
weights without motor
stroke 0 mm 8,55 kg 9,25 kg
per 100 mm stroke 0,91 kg 0,91 kg

 

Technical information

System size 100

 

Features

  • profile guide rail for high-precision guidance
  • high movement speeds and precise positioning
  • sturdy aluminium frame (100 x 100 mm) with grooves for fixing
  • externally accessible lubrication system
  • both inductive and mechanical end and reference switches possible
  • incl. aluminium table plate
  • motor flange on either left or right
  • can be fitted with one or two carriages
  • two axes can be driven synchronously via a single drive shaft
  • optionally available: adapter plates, slot nuts, shaft drive, motor flange combinations and switches

 

HSLE100

 

Technical data

Compact module with special timing belt

transmission 1:1
max. perm. centr. force per carriage 2000 N
max. perm. axial force 1500 N
number of teeth 27
feed constant 216 mm -1
Vmax (depending on motor) 5 m/s
max. drive torque 75 Nm
repetition precision ± 0,10 / 1000 mm
 
perm. bending torque 1 carriage double carriage
Mx 126 Nm 252 Nm
My 90 Nm 456 Nm
Mz 78 Nm 313 Nm
 
weights without motor
stroke 0 mm 11,70 kg 12,70 kg
per 100 mm stroke 1,53 kg 1,53 kg

 

Technical information

Type HLE

 

Common features

  • ball screw-driven linear unit with inclines 5, 10, 16
  • standard ball screw drive 16 x 10 und 16 x 5
  • guide elements are 2 precision guide shafts with 4 linear bushings per carriage
  • can be fitted with one or two carriages
  • zero-wear aluminium sheet cover
  • incl. polished steel table plate
  • externally accessible lubrication system
  • optionally available: special table plates, motor flange combinations and switches

 

HLE16

 

Technical data

Flat compact linear unit with ball screw drive

guide shaft diameter 16 mm
max. perm. centr. force per carriage 4000 N
max. perm. axial force per carriage 1000 N
max. perm. long/lat tilting torque 80 Nm / 94 Nm
Vmax (depending on motor) 1.0 m/s
 
positioning precision
KGT 12 x 5 / 16 x 5* ± 0,05 mm
KGT 16 x 10* ± 0,05 mm
KGT 16 x 16* ± 0,10 mm
 
weights without motor
stroke 0 mm 4,20 kg
per 100 mm stroke 1,10 kg

 

Technical information

 

 

HLE20

 

Technical data

Flat compact linear unit with ball screw drive

guide shaft diameter 20 mm
max. perm. centr. force per carriage 7000 N
max. perm. axial force per carriage 2000 N
max. perm. long/lat tilting torque 380 Nm / 330 Nm
Vmax (depending on motor) 1.0 m/s
 
positioning precision
KGT 12 x 5 / 16 x 5* ± 0,05 mm
KGT 16 x 10* ± 0,05 mm
KGT 16 x 16* ± 0,10 mm
 
weights without motor
stroke 0 mm 5,20 kg
per 100 mm stroke 1,80 kg

 

Technical information

 

*Standard spindle accuracy according to IT7 (52 μm / 300 mm measuring length)

Type SLE

 

Common features

  • timing belt-driven linear unit
  • 2 precision guide shafts with 4 linear bushings per carriage
  • pinion sizes/belt widths: 12 teeth / 25 mm and 21 teeth / 25 mm
  • zero-wear aluminium sheet cover
  • can be fitted with one or two carriages
  • incl. polished steel table plate
  • externally accessible lubrication system
  • optionally available: special table plates, motor flange combinations and switches

 

SLE16 25T5 / Z12

 

Technical data

Flat compact linear unit with belt drive

timing belt type 25T5
transmission 1:1
max. perm. centr. force per carriage 4000 N
max. perm. long/lat tilting torque 80 Nm / 94 Nm
number of teeth 12
feed constant 60 mm -1
positioning precision ± 0,3 mm
stat. frictional torque 0,19 Nm
Vmax (depending on motor) 2 m/s
 
weights without motor
stroke 0 mm 4,30 kg
per 100 mm stroke 0,80 kg

 

Technical information

 

SLE16 25AT5 / Z21

 

Technical data

Flat compact linear unit with belt drive

timing belt type 25AT5
transmission 1:1
max. perm. centr. force per carriage 4000 N
max. perm. long/lat tilting torque 80 Nm / 94 Nm
number of teeth 21
feed constant 105 mm -1
positioning precision ± 0,3 mm
stat. frictional torque 0,19 Nm
Vmax (depending on motor) 2 m/s
 
weights without motor
stroke 0 mm 4,60 kg
per 100 mm stroke 0,80 kg

 

Technical information
JBP Pfeil back top
facebook instagram linkedin youtube

© 2024 Johs. Boss GmbH & Co. KG - All rights reserved. | Contact | Imprint | Privacy policy| Cookie-policy | Terms of Service | Tel. +49 7432 9087 0